HB FULLER - Max Bond

Product Overview
NEW FORMULA Max Bond Construction Adhesive is just that, a new formula. It still bonds most common construction materials, as is primarily used in the installation of roof trusses, flooring or wall paneling. They have maintained the best features from the previous formula, it’s high bond strength and water resistance, and have now made it easier to gun out in ALL conditions, hot or cold.
Some may ask, ‘why change a good thing?’, and they are right. All they have done, is made it an easier product to use.

Primary Uses
• Installing particle board, fibre cement,
plasterboard, plywood and strip flooring to joists
• Bonding roof trusses
• Bonding fibre cement, plasterboard and wall
paneling to timber and metal studs
• Bonding skirting boards, architraves and trims to walls
• Bonding polystyrene wall panels

Substrates
• Timber • Concrete • Plywood • Cement sheeting
• Metal • Particleboard • Ceramic • Plasterboard
• Polystyrene • Fibreglass

Product Benefits
• High bond strength - exceeds Australian
Standards AS2329-1999
• Gunability - guns out easily in cold or
warm conditions
• Repositionable for up to 20 minutes
• Water resistant

Product Restrictions
• Do not use Maxbond Construction Adhesive
where temperatures will exceed 80°C
• Maxbond Construction Adhesive is not suitable
for immersion
• Maxbond Construction Adhesive can be used in
exterior applications, but must not be exposed
to prolonged direct sunlight.
• Do not apply at temperatures below 5°C.